When fixing the switch body, use M2 screws on the smooth surface with a torque of 0.098N·m or less. In addition, to prevent loosening of the screws, it is recommended to use washers at the same time.

(2) Please note that in the free state, the action body should not directly exert force on the button or the exciter, and the button should exert force in the vertical direction during use.

#Micro Switch

(3) The operation setting after operation is based on 70[%] or more of the O.T. value. In the case of a switch, #Micro Switch do not set the operating body at the operating limit position to prevent the life from being shortened by the opening and closing and overtravel caused by the shock.

(4) In the case of hand soldering, please use an electric temperature of 320°C with temperature adjustment to complete the operation within 3 seconds, and be careful not to apply force to the terminal part during the operation.

(5) It is recommended to use a low-power circuit type (Au-clad contact) when using it at a small current and voltage.#Micro Switch

Zhejiang Shuyi focus switch

www.shuyitop.com